How To Set Up Swann Dvr For Remote Viewing
In that location's an easy way to access your Swann DVR or NVR on a estimator via the HomeSafe View software. You tin can add your security system to the software and view your security cameras locally or remotely from your PC/laptop. Using the HomeSafe View software yous tin lookout man live your cameras, playback the recordings, download any footage, manage your settings and cameras, etc.
Earlier y'all start, make sure you have downloaded and installed the HomeSafe View software on your computer or laptop. Too, you need to have your DVR's information such every bit username and password. You can add together the DVR to the software if you're on the same network or even remotely (non in the location). Follow the steps below.
How to view Swann cameras on PC
Calculation a Swann DVR to the HomeSafe View software
Step 1. Open HomeSafe View software on your computer. You'll see the login screen. If it asks you to log in, merely click on Login and type in the password you gear up for the software.
If you lot didn't ready anything, the default password is blank (empty). So merely leave it empty and log in. Note: this is the password to login to the HomeSafe View software, for the software itself, it'south non the password of your Swann DVR or NVR.
Pace 2. Under the Control Panel, click Group Device Management. If you tin't locate this button, go to Tool > Grouping Device Direction at the superlative instead.
If the computer you are using is on the same network where the Swann DVR is, y'all can click on Add Online Device and you lot should meet a similar window below. (Note: If the figurer is not on the aforementioned network, refer to the adjacent department of this article)
Select the DVR by clicking it and then Add Selected Device. Afterwards doing so, type in a Device Proper name and the User Name and Countersign you lot gear up at the initial kicking-up of the DVR. So, here you lot have to enter the username/password. Once you are done, click on Add and keep to Importing Cameras (read next department)
The figurer is not on the aforementioned network
If the estimator is not on the same network, click on Add Device and you lot should see the window below.
Enter the data needed. It should await something like this:
One time you are done, click on Add and proceed to import the cameras (next section).
Importing the Swann cameras to HomeSafe View software
Once added, the Swann DVR will now be listed at the left. Click on Import All to add together all cameras to the right with the Group proper noun of DefaultGroup. Should look something like to the picture below.
As you can run into, in our instance nosotros accept the DVR added (DVR model DVR-4575) and four cameras listed.
Note: You tin click the triangle icon beside DefaultGroup to aggrandize.
How to view the cameras on HomeSafe View software
To view the cameras, yous need to get to Principal View. To do so, go back to the Control Panel > Main View. Simply click and elevate DefaultGroup to the right to load all of the channels.
You can open up whatsoever photographic camera you desire and you'll be able to see the live view. If you lot are operating multiple DVRs and only want to load i DVR at a time, expand the DefaultGroup and only drag the required DVR.
How To Set Up Swann Dvr For Remote Viewing,
Source: https://securitycamcenter.com/view-swann-cameras-homesafe-view-software/
Posted by: smithpustrythe.blogspot.com
0 Response to "How To Set Up Swann Dvr For Remote Viewing"
Post a Comment